Water soluble cutting oil

Soluble and semi-synthetic cutting oils are emulsified in water and used in both light and heavy-duty operations.

These products are a blend of naphthenic oil, emulsifiers, additives and suitable bactericides which can be used for both ferrous and non-ferrous metals.These oils are not recommended for machining of magnesium and its alloys due to the fire hazard risk. Our oil range can be further classified as:
1.General purpose soluble cutting oil consisting of mineral oil, emulsifiers and other additives. These cost-effective oils can be widely used across industries.
2.Semi-synthetic oils which contain mineral as well as synthetic components to meet lubrication and emulsion requirements for certain operations.

Quenching oil

Quenching refers to the process of rapidly cooling steel components in a controlled atmosphere

at a certain temperature to impart strength and hardness.The materials used for quenching include water, mineral oil, molten salt, brine solutions and synthetic oils.

Rust protection oil

Rust protection oil is used where protective measures such as alloying, plating and painting cannot be used.

Most metallic parts and finished machines need to be protected from rust before further assembly and processing. For example,automotive parts can require protection ranging from a few days to a month.
Fasteners, steel strips, steel sections drawn sections of steel, aluminium alloys and yellow metals also require protection.
These oils are used where protective measures such as alloying, plating and painting cannot be used.

Drawing and forming oil

We offer a wide range of drawing and forming oils for different metal industries.

APAR offers a wide range of drawing oils for the aluminium wire and steel tube industries. We also offer forming oils for the nut and bolt, aluminium fin pressing and sheet metal stamping industries.